The C105 V-belt is a Drive belt designed for industrial drive systems that require a longer belt length and reliable power transmission. With an inside length of 2,667 mm (105 inches), it is suitable for a wide range of industrial machinery, mechanical equipment, and medium- to heavy-duty drive applications.

What is a C105 V-Belt?

The C105 V-belt is a Classical Section C V-belt used to transfer power from motors to pulleys in mechanical equipment. Its 105-inch nominal length makes it a practical choice for drive systems with relatively large pulley center distances while maintaining consistent performance during continuous operation.

The belt is manufactured from synthetic rubber reinforced with high-strength tensile cords, providing good tensile strength, resistance to belt slippage, and effective vibration absorption during operation. With its relatively large Section C profile, the C105 is suitable for applications requiring higher power transmission capacity than smaller belt sections.

Common brands supplying C105 V-belts include:

  • Bando C105 V-Belt
  • Mitsuboshi C105 V-Belt
  • Gates C105 V-Belt
  • Optibelt C105 V-Belt
  • PIX C105 V-Belt
  • Sundt C105 V-Belt

C105 V-Belt Technical Specifications

  • Belt Code: C105
  • Belt Type: Classical V-Belt - Section C
  • Inside Length: 2,667 mm (105 inches)
  • Outside Length: 2,768 mm
  • Top Width: 22 mm
  • Thickness: 14 mm
  • Included Angle: 40°
  • Minimum Pulley Diameter: 180 mm
  • Maximum Belt Speed: 30 m/s
  • Operating Temperature: -30°C to 90°C
  • Material: Synthetic Rubber
  • Standard: RMA

Note: Specifications may vary slightly depending on the manufacturer and applicable production standards. Before replacing a belt, it is recommended to check the actual belt dimensions and the manufacturer's catalogue to ensure proper compatibility.

Applications of the C105 V-Belt

With its reliable power transmission capability, the C105 V-belt is used across a variety of machinery and industrial production lines. Common applications include:

  • Machine tools and mechanical equipment: Used on lathes, milling machines, drilling machines, machining equipment, and other machinery requiring dependable power transmission.
  • Industrial conveyor systems: Installed in conveyor drive assemblies, particularly where the motor and pulley are positioned relatively far apart.
  • Woodworking machinery: Suitable for saws, planers, sanders, and other woodworking equipment requiring high torque transmission.
  • Crushing and production equipment: Used in crushers, mixers, presses, and other machines found in industrial production lines.
  • Cement and mining equipment: Applied to screens, crushers, feeders, and drive systems operating under demanding, heavy-duty conditions.
  • Agricultural machinery: Used on grinders, threshers, animal-feed processing machines, and other agricultural equipment.

Compared with the C104 V-belt, the C105 has an inside length that is 25.4 mm longer. Therefore, the correct belt should be selected based on the actual drive dimensions rather than the belt code alone.

Belota - Supplier of Genuine C105 V-Belts

When replacing an industrial V-belt, selecting the correct belt code, dimensions, and cross-section is essential to prevent excessive tension, belt slack, or incompatibility with the pulley. Belota supplies C105 V-belts from trusted brands such as BANDO, Gates, Mitsuboshi, Optibelt, and PIX, serving a wide range of machinery replacement and maintenance requirements.

When purchasing a C105 V-belt from Belota, customers receive:

  • Products with clear and traceable origins.
  • Assistance checking and confirming the C105 belt code before delivery.
  • Technical advice on selecting a suitable brand based on load and operating conditions.
  • Support in choosing the correct belt based on the dimensions of the existing belt and pulleys.
  • Nationwide delivery across Vietnam.
  • CO/CQ documentation when available or required for specific products and projects.

If you are unsure which belt code to use, you can provide the dimensions of the existing belt, machine information, or photos of the pulley. The Belota technical team can then help check the specifications and recommend a suitable replacement.

Contact Information

  • Email: info@belota.com.vn
  • Hotline/Zalo: +84 917 657 946
  • Address: B74 Le Thi Rieng Street, Thoi An Residential Area, Thoi An Ward, Ho Chi Minh City, Vietnam